- innovative MPPT technology
- highest efficiency up to 99.5%
- ?ultra-fast? recording speed
- precise recognition of multiple maximum power points (MPP)
- multi-functional LCD display
- manual setting options of battery types, load management, etc.
- negative grounding at (-) pole
- RS485 interface with MODBUS industry standards
- via PC software multiple fully programmable functions
- automatic limitation of charging power and current
Large MPP operating voltage range
Compatible with lead-acid and lithium-ion batteries
Battery temperature compensation function
Real-time energy statistics
Overheating reduction function
Several working modes for loading
ExplanationMPPT (Max Power Point Tracking) allows the optimal use of the complete power of your modules.
For most commonly used module technologies and module with optimal module voltages higher than the battery voltage.
You can also use modules that are usually used in grid-connected PV installations.
The Maximum Power Point of solar modules changes depending on multiple factors, e.g. module temperature, irradiation, type of module etc. This point of operation is constantly monitored by the internal microcontroller and adapted if necessary to get the maximum power of every module to charge the batteries.
ExampleThis can be visualized with an example (130W module).
MPPT voltage = 17.5 V, MPPT current = 7.42 A, resulting in 17.5 V x 7.42 A = 130 W.
If the module is connected to the MPPT charge controller, the voltage is constant at 17.5 V.
However, if the module is connected to a normal controller with a 12 V battery, the module voltage is 12 V accordingly.
At full irradiation the module would deliver 12 V and 7.42 A, resulting in 12 V x 7.42 A = 89 W.
The advantage: the MPPT charge controller increases the output of your modules by up to 40 % compared to a regular charge controller.
|More power advantages|
The switching thresholds for over- and under-voltage, load disconnection and reset voltage are controlled precisely and temperature-independent by the internal microcontroller. These switching thresholds are user selectable and freely programmable via PC-software.
FeaturesWith the Display MT50 or an adapter cable in combination with the integrated software, the charge controller can be controlled and monitored. Additionally, monitoring of the controller is possible via the PC-software.
4 battery types are selectable. In the battery type User, voltages are selectable and programmable via software (e.g. for lithium batteries).
A switchable load port allows the user to switch on and off every load connected to the solar controller with a simple press on a button or via the PC-software.
The load output will be cut off in case of undervoltage. As soon as the voltage reaches a preset threshold, the load output is reconnected.
2 timers can control a night-light as soon as the regulator recognizes "night" through the solar module.
Yield data and system parameters can be recorded with the PC-software.
The optional Display MT50 offers monitoring and control options as well.
- MPPT (Max Power Point Tracking)
- maximum charging current 40 A
- automatic system voltage recognition 12/24 V
- solar input: module open-circuit voltage from 5 V to 100 V
- battery deep discharging protection, overcharging protection, overload protection
- RS485-interface, MODBUS protocol
- monitoring via PC-software or Display MT50
- temperature-dependant adaptation of charging parameters
- load port with switch-off possibility
- battery types selectable (lead-acid, AGM, Gel, User)
|Technical data||MPPT Tracer A series|
|Rated battery voltage||12/24 V DC (automatic)|
|Module open-circuit voltage||up to 100 V DC|
|Max. module power||520W/12V 1040W/24V|
|Max. charging current||40A|
|Temperature range||-25°C to +45°C|
|Connection clamps||16 mm²|
External temperature sensor (2069), PC adapter cable-USB (2762), monitoring software, Display MT50
Mounting instructions / monitoring software